Replacement Pool Electrodes for Chamber (0.5IN x 0.5IN x 2.5IN)

Copper Electrodes for Perma Salt Chambers

Our copper electrodes are perfectly compatible with the Perma Salt chamber. Unlike other components, the electrodes erode over time, and their replacement is the sole reason for chamber changes. Opting to replace both the chamber and electrodes simultaneously offers a cost-effective solution.

Package Contents

Each package includes: - Two Copper Electrodes: Specifically designed for replacing eroded electrodes. Measurement: 1/2 inch by 1/2 inch by 2.5 inches. - Two Stainless Steel Screws: For secure installation. - Two Spade Terminals: To connect the electrodes to the chamber. - Two Lockwashers: To prevent loosening. - Two Sealing Washers: To ensure a leak-free installation.

Only a cross screwdriver and long needle-nose pliers are required for installation.

Simple Installation Guide

1. Remove the Chamber: Carefully take the chamber off the transformer module.
2. Loosen Screws: Using a screwdriver, loosen the stainless steel screws on each electrode.
3. Remove Eroded Electrodes: Push up on the electrodes to unseat them from the square socket.
4. Insert Replacement Electrodes: Using your long needle-nose pliers, insert one electrode into the short side of the chamber.
5. Attach the Electrode: Start the screw from the bottom side of the chamber. Once started, the electrode will reseat.
6. Tighten Properly: Ensure the spade terminal is correctly positioned, pointing towards the long end of the chamber.
7. Repeat: Follow the same steps to install the second electrode.
8. Reattach the Chamber: Place the chamber back onto the transformer module.

Important Notes

• Do not install washers or spade terminals in any other order. The sealing washer must be placed next to the chamber to prevent leaks.
• Confirm that the parts are correct before purchasing. If you are unsure, contact us for verification.

By following these steps, you can easily and efficiently replace your Perma Salt chamber electrodes.